QBU-mini-series consist of several Pockels cell drivers differ with their output voltage range (see also How to order? section) and covering range up to 3.5 kV.
Modules have fast transition times in both directions and repeat at their output external driving TTL signal. As a result they may be used for q-switched lasers of push-up scheme, pull-down scheme as well for mixed-type or other user-defined scheme.

Under conditions of appropriate forced air cooling, low load capacitance and low operating voltage modules may achive performance up to 30 kHz (CW) or 50 kHz (in burst-mode).
Output:
repetition of the input TTL signal
Voltage, high level
adjustable, up to 3.5 kV
1
Voltage, low level
fixed, 0 V
Max. repetition rate
up to 30 kHz (CW), up to 50 kHz (burst-mode)
1, 2
Rise time (fall time)
10 ns typ.
3
Environment:
Operation temperature
+10 … +40 °C
Storage temperature
-20 … +60 °C
Humidity
90%, non-condensing
Other:
Size (LxWxH)
140x50x20 mm
1)
these parameters aren't indepenent and cannot achieve their maximum at the same time
2)
forced air cooling is required for operating with high repetition rates
3)
10-90% level, warranted at load capacitance 11 pF and below
Modifications
1.4-3.5 kV high voltage adjustment range
1.2-3.0 kV high voltage adjustment range
0.8-2.0 kV high voltage adjustment range
0.4-1.0 kV high voltage adjustment range
(*) Other output voltages are available on request
Example
1.4-3.5 kV high voltage adjustment range